2013 Cube Aim Disc 26 Fresh Review

Cube Aim Disc 26 MSRP £499 best offer a choice, A reliable hardtail with comfortable seating position and efficient 24-speed equipment with extended capabilities thanks to disc brakes. The Aluminum Lite 6061 frame is especially designed for use with disc brakes. The cross-ovalized down tube is manufactured using Advanced Mechanical forming process, designed for high durability. The RFR geometry delivers a comfortable riding position due to a shorter top tube. The Frame Save System consists of a replaceable derailleur hanger with thread in the hanger. The Shimano BR-M395 disc brakes offer reliable stopping power. Comfort comes from the Schwalbe Smart Sam 2.25 tires. More features are the clean cable routing, Easton EA30 oversized stem and handlebars, Easton EA30 seatpost and the Shimano 3×8 components with Alivio rear derailleur. The Suntour XCM fork comes with lockout and 100mm of travel.

Ride and Handling Aim Disc 26:

The endowment of obtaining cheap management from a coffee budget fork with very little or no rebound management is to stay your weight over the front of the bike. It takes {a bit|a very little|a trifle|to a small degree|somewhat|slightly|alittle} of nerve to try and do this at first however it’s barely enough to prevent the fork from rebounding back to full extension when each little bump. Lifting the side slightly on bumps helps too.

A sticky compression feel doesn’t facilitate, and our expertise with this fork tells U.S.A. that terribly wet rides typically end in the compression changing into even a lot of sticky, to the purpose wherever regreasing the seals is important. But the 2.25in tyres facilitate to offset a number of the fork’s performance limitations – they need a giant enough profile to feature confidence via additional management and luxury and also the spacy tread profile doesn’t block in mud.

A relatively horizontal bar position, with regarding an in. of stem adjustment potential, combines with with confidence neutral pure mathematics to form a steady-going and really comfortable ride and also the kind of handling that feels nimble at high and low speed on any kind of path. Fork performance is that the single limiting issue once the parcel of land gets rough. Everything else is sweet enough to create associate degree ultimate fork upgrade worthy.

The 29in wheel version of the Aim is a lot of assured at speed, like on the long descents that showed up the fork’s limitations, as a result of massive wheels roll electric sander and general stability is best on a motorbike with a extended distance.

The extra zero.5lb in weight and £30 in value of the 29er may delay some riders however it’s smart to possess a selection. The Aim is nice worth for cash.

Frame and Equipment Aim Disc 26 :

The Aim’s 6061 aluminum frame may be a nicely created giving with a spread of tube shapes designed to extend strength and stiffness while not bulking up the burden.

The outsized down tube is biaxially ovalised, flaring into the top tube and also the bottom bracket shell to present most weld contact areas, there’s generous standover height, the top tube is ring bolstered and there’s millions of mudroom round the a pair of.25in tyres.

Seatstay rack and ‘guard eyelets area unit there and Cube additionally embody a fat chainstay wrap to deflect chain slap and a tricky adhesive strip beneath the down tube to shield the tube from stones flicking off the front wheel. There area unit 2 sets of bottle bosses and a cage is equipped.

The Suntour XCM is that the most often fitted fork on bikes at this value, associate degreed as was common it’s compromised in performance by an uncontrolled rebound. It’s OK on non-technical trails however becomes alittle of a few once the sq. edged bumps are available fast succession. The preload dial on our sample didn’t build a lot of distinction to the spring strength, and that we ne’er got quite 60mm (2.4in) of the claimed 100mm (3.9in) travel, however the resistance was terribly effective.

This specific fork carried on operating throughout the period however an equivalent fork on alternative bikes has been vulnerable to ingesting dirt and water through the seals at the highest of the sliders. Suntour say this could be a batch downside with the seals, however we have a tendency to won’t apprehend till we’ve tested a lot of forks later within the product year. In short, you usually got to pay extra money for a motorbike with a fork that’s certain to work well while not regular conjugation.

It’s smart to check a full Shimano drivetrain and brakes on a sub-£500 bike. The shifting performance on the Aim was swish and instant, front and rear, and also the brakes offered wonderful bite right from the off, with higher modulation than most of the opposite brakes during this take a look at.

The wheelset may be a highlight too – it includes Shimano hubs laced to powerful eyeleted Alex rims shod with grippy however quick rolling good guided missile Schwalbe treads. associate degree Easton bar, stem and two-bolt seatpost are terribly welcome finishing touches on a motorbike at this value and Cube’s Scape saddle is softer than plenty of budget offerings.

Image Gallery Aim Disc 26 : Photo

Click For Large Image

Image Credit: © Cube

Specs  Aim Disc 26 :

  • 14″, 16″, 18″, 20″, 22″
  • Alu Lite 6061 AMF RFR-Geometry, disc only
  • grey ‘n’ red
  • Suntour XCM Lockout 100mm
  • FSA No.10 semi-integrated, 1 1/8″
  • Easton EA30 Oversized, Lenkerklemmung 31.8mm, 8°
  • Easton EA30 Lowriser Oversized, 660 mm
  • CUBE Performance Grip
  • Shimano Alivio RD-M410 Top Normal 8-speed
  • Shimano FD-M310, Top Swing 34.9mm, 8-speed
  • Shimano SL-M310 Rapidfire-Plus, 8-speed
  • Shimano BR-M395 hydr. disc brake (160/160mm)
  • Shimano Acera FC-M361 42x32x22T, Innenlager BB-UN26 123mm
  • RFR ZX24
  • Shimano HB-RM35 Centerlock Disc
  • Shimano FH-RM35 Centerlock Disc
  • Schwalbe Smart Sam 2.25
  • Alu PD-971
  • Scape Active 8
  • Easton EA30 31.6*400mm
  • RFR Varioclose 34.9mm
  • 13,85 kg
  • 401002
TECHNOLOGY :
  • Aluminium Lite
    6061 aluminium alloy requires a heat treatment for the finished product. It is a stiff, very corrosion resistant, fatigue resistant, non-shearing material suitable for light tube-sets with high stiffness.
  • Wet Paint Surface
    On polished, brushed aluminium and all HPC frames, the logos and graphics are applied in multi-layer wet paint. We use this surface treatment technology mainly to save weight.
  • Frame Safe System
    To protect our high-end aluminium frames from damage, they are built with the CUBE Frame Save System replaceable derailleur hanger. The mounting thread is in the hanger and not in the frame as usual. In case of a crash, this hanger can be easily and quickly replaced by a new one. 

Leave a Comment